Site Map

Brake post stud (bare), 03/04 30mm-Monolite: 03/04 30mm-Monolite Brake post stud for 2003 & 2004 (30mm-stanchion) 26 1-piece Monolite leg castings (NO 29) (Bare) = stud spacer/spring-plate separate: MZ-532114 2003/2004: Marathon & MX series (Air & Coil 26 ONLY) forks Sold EACH: 2 per fork NOT for 2003/2004 29 (02-style) leg castings = USE: MZ-532105 NOT for SR-Suntour made EXR fork, USE: MZ-524116 Dropout nut + o-ring, 03-05 30/32mm (ADJ): 03-05 30/32mm (ADJ) 2003-2005 (ADJ: external bottom adjuster) 30/32mm-stanchion forks (03: Junior-T; 03-05: DJ1, MX-Pro/ETA)+ Adjuster and bolt sold separate, USE: MZ-549067 + MZ-520313 Dropout nut + o-ring, 03-05 30/32mm (N/A): 03-05 30/32mm (N/A) 2003-2005 (N/A: no external bottom adjuster) 30/32mm-stanchion forks (does not fit 2003-2005 Shiver-series, use: MZ-532756) Disc housing guide (bare), 03-05 (32/35mm): 03-05 (32/35mm) For 2003-2005 32/35mm-stanchion leg assemblies (888-series, 66-series, Super/Jr-T, Z1/DJ-series, AM-series) Bare (for mounting bolt, USE: MZ-520341) Disc housing guide, 02-05 30mm-Monolite: 02-05 30mm-Monolite Plastic disc-tubing/housing guide 'threads' into boss-mount on 02-05 (30mm-stanchion) 1-piece Monolite leg castings and 2005 D-Street 24 02-05: Marathon and MX series (Air and Coil / 26 and 29) forks NOT for SR-Suntour made EXR fork (No studs avail yet) NOT for M-Arch forks where bolt secures arch to legs Brake post stud, 95-00 Marz (bolt-on): 95-00 Marz (bolt-on) Fits all 97-00 Marzocchi Bomber/BAM forks w/ CNC brace w/bolt-on fork brace ONLY !!! Also fits XC500,600,700, DH3,XCR, Zokes forks. Does not fit 1-piece cast M-Arch forks, use MZ-532927 Inflation adapter, 99 S-Fly, 00 Z2 QR20: 99 S-Fly, 00 Z2 QR20 90 degree double-valve Schrader adapter Brake post stud, 00-02 M-Arch, 02+ 29: 00-02 M-Arch, 02-04 29 Fits all 2000-2002 Marzocchi forks with the 3-piece (M-Arch) leg/brace assembly: Magnesium or Aluminum (No 97-00 bolt-on brace) Also for 03/04: 29 Marathon and MX series (Air & Coil) forks. Do not remove without replacing stud with bolt (MZ-532979), integral part of fork assembly Longer stud with finer thread pitch than (bolt-on) style Does NOT fit 02-04 Monolite (1-piece) castings = USE: MZ-532105 ('02) or MZ-532114+MZ-532115 ('03/04) Fork brace no stop, 97-00 (2000 design): 97-00 ('00 design) (BlackSpire fork brace)NEW 2000 BAM fork brace (will retrofit 97-99 Bomber model Marzocchi forks) For use with standard cantilevers, use: MZ-850580 (bolt-on housing stop kit) Stud replacement bolt, M-Arch forks ea: M-Arch forks ea For use when removing brake post studs from M-Arch Marzocchi forks (e.g. X-Fly), must use these bolts to keep fork from sepatating Does NOT fit 2002 Monolite (1-piece) castings = USE: MZ-532102 Dust wiper, Monster T (40mm): Monster T (40mm) (Seal/Wiper kit) Seal removal leg protector, Shiver-DC/888: Shiver-DC/888 For 2001-2004 Shiver-DC & 2004 888 (35mm stanchion) forks Protects leg from damage when prying out the main oil seal Seal removal leg protector, Monster T: Monster T For 1999-2002 Monster T (40mm stanchion) forks !!! -Protects leg from damage when prying out the main oilseal... Main seal washer, Shiver-DC(35mm) ea: Shiver-DC(35mm) ea Main seal washer, Shiver-DC(35mm) ea Adj knob + screw, 98-05 (sidecut) - blk: 98-05 (sidecut) - blk This is the stock replacement knob found on 01/02 and some 03-05 ('05 Jr-T) forks (will also retro 1998-2000 models) 01/02 styling: same as 98-00, but smaller OD (and less expensive) ECC/ETA adjuster toggle-arm, 01-03: 01-03 Does not fit 02/03 Marathon (Air) or 03 Z1-FR/SL forks with ECC-5 Material change in 2002 from silver-aluminum to black-composite Fixing bolt not included, USE: MZ-520313 Doppio-Air cap, 02/03 Marathon, 03 Z1-SL: 02/03 Marathon, 03 Z1-SL Top air valve cover/cap for 02/03 Marathon, and 03 Z1-FR/SL (Doppio-Air) model forks M-design graphic mold for easy-to-turn use QR20+ cam-bolt nut, 03/04 QR20+ M4x.7mm: 03/04 QR20+ M4x.7mm Black-anodized 'bomb-shaped' aluminum nut attaches to top of 2003/2004 QR20+ dropout and threads to Q/R-lever cam-bolt allowing for proper Q/R-lever tension (M4x.7mm threads)+ Nut only: no hinge/clamp, Q/R-lever or cam-bolt (USE: MZ-710024 for Q/R-lever + cam-bolt) We are not stocking hinge/clamp or hinge/pin (will fit 2004 QR20 systems if used with matching nut: 2004 changed to M5x.8mm cam-bolt/nut parts not stocking) Dropout adjuster knob, 03-05 (ADJ): 03-05 (ADJ) Plastic, dropout adjuster knob for 2003: Junior-T; 2004: Z1-DO/1; and 2003-2005: DJ-1, MX-Pro/ETA Mounting bolt and dropout nut sold separate, USE: MZ-520313 (bolt) / MZ-532129 (nut+o-ring) Direct-mount stem kit, 2003-05 DTC - 1/13mm: '03-05 DTC - 1/13mm Direct-Mount stem system for Shiver-DC and '03-05 dual-crown forks (no 888 fork models, proprietary stem: fits 888 models only) Fits 31.8mm (Oversize) and 25.4mm (Standard) handlebars Black: Upper/Lower clamps with Red: handlebar shim Allows for 1mm or 13mm reach adjustments Includes all mounting bolts Direct-mount stem kit, 2003-05 DTC - 55/67mm: '03-05 DTC - 55/67mm Direct-Mount stem system for Shiver-DC and '03-05 dual-crown forks (no 888 fork models, proprietary stem: fits 888 models only) Fits 31.8mm (Oversize) and 25.4mm (Standard) handlebars Black: Upper/Lower clamps with Red: handlebar shim Allows for 55mm or 67mm reach adjustments Includes all mounting bolts Adj cap+o-ring, 98-02 Adj-damp(26mm): 98-02 Adj-damp(26mm) Fits most 1998-2000 & 01/02 Super-T Adj-damper forks New lower profile cap for 1998+ (pinch-bolt) crowns 26mm hex with safety ring-clip grooves Does not fit 00-02 Z2 Atom 80/Race or 01/02 Z1 MCR/FR, use: MZ-701174 (21mm hex design for S/C/S fitment) Top cap + o-ring, 99 SuperFly: 99 SuperFly Top cap + o-ring, 99 SuperFly Adj cap assy, 99 Z4 (each): 99 Z4 (each) Wrench-adjustable preload cap for 1999 Z4 forks Rebound damper assy, 99/00 Mr T: 99/00 Mr T For 1999 & 2000 Mr T QR20 forks - ECC Retro-cartridge, 01/02 X-Fly 80: 01/02 X-Fly 80 For Retrofitting 2001 X-Fly 80 forks with a (Lock-Down) cartridge similar to that found on the 2001 Z1 MCR fork...+ Also stock cartridge for 2002 X-fly 80 ECC Retro-cartridge, 01/02 X-Fly 100: 01/02 X-Fly 100 For Retrofitting 2001 X-Fly 100 forks with a (Lock-Down) cartridge similar to that found on the 2001 Z1 MCR fork...+ Also stock cartridge for 2002 X-fly 100 Neutral pumping shaft, 01 X-Fly 100: 01 X-Fly 100 01 X-Fly 100 ECC Retro-cartridge, 98-02 Z1 (100-110mm): 98-01 Z1(100-110mm) Adjuster toggle not included (sold separate). Also stock cartridge for 2002 Atom (100mm)For Retrofitting 1998-2001 Z1 (100-110mm travel) forks with the 01/02-style ECC (Lock-Down) cartridge... Damper piston assy, 00 Z2 X-Fly: 00 Z2 X-Fly Damper piston assy, 00 Z2 X-Fly QR20+ Q/R-lever+cam-bolt, 03/04 QR20+ M4x.7mm: 03/04 QR20+ M4x.7mm Lower, metal (winged) Q/R-lever and cam-bolt for 2003/2004 QR20+ Used in conjunction with top nut and hinge/clamp to tension and secure QR20 axle into QR20+ dropout (2003-spec M4x.7mm threads)+ No black-aluminum top nut, use: MZ-549066 (will fit 2004 QR20 systems if used with matching nut: 2004 changed to M5x.8mm cam-bolt/nut parts not stocking) Travel ext kit, 00 Z1-DO 110-130mm: 00 Z1-DO 110-130mm For Extending travel from 110mm to 130mm on 2000 Z1-Dropoff & Z3-QR20 Internal-Adj damping, Coil forks Includes: MZ-5141164 130mm spring set. MZ-5141131 short top-out springs, and instructions Coil kit, 03/04 Z1-FR/DO+ETA (32x130) 6.0K: 03/04 Z1-FR/DO+ETA (32x130) 6.0K 2003/2004 (32mm stanchion) Z1-series+ETA 130mm travel forks. Does not fit '03 Non-ETA 32mm-stanchion, 130mm-travel MZ-850341 (5.0K-stock/heavy) = 145-200lb (Not stocking) MZ-850342 (? color) = 200+lb rider (6.0K Extra-Heavy rate) Stanchion/DTC rise kit, 98-02 Jr T: 98-02 Jr T 1 7/8 Jr-T 30mm-stanchion extenders to allow for larger frame installs (Std Jr-T will fit 6.5 stack height headtube/headset) NOTE: Will NOT work with Super/Mr-T forks (valve adjusters prevent longer stanchions) Dual-rate coil kit, 99-02 80mm 180-240: 99-02 80mm 180-240 Also fits '03/04 26&29-wheel MX-Comp (non-ETA) 85mm travel forks Fits 97-99 Z2 models, 98/99 Atom Bomb, 98/99 Z3-std & 99 Z4 & 2000/2001 Z2 Atom 80/Race forks. (No Z3-LT) Order as follows for 80mm forks: MZ-850658 (yel/blu) = 120-155 lb rider MZ-850659 (wht/blu) = 145-180 lb rider MZ-850660 (red/blu) = 180-240 lb rider(MZ-5141158 (Pro-Wind) & MZ-5141184: 145-180lb are OK) IS-TA (51mm) disc adapter, 99/00 QR20 ea: 99/00 QR20 ea For use on 1999/2000 QR20 forks when changeing to International Standard through-axle dimensions and/or to run Hayes 8 systemInlcudes: (1) IS-TA adapter plate (51mm E-E) (1) Dropout backing plate (for thin-style QR20 dropouts) (2) Mounting bolts Seal/Wiper kit, 97-05 Marzocchi (30mm): 97-05 Marzocchi (30mm) Includes: (2ea) dust wipers, and main oil seals for 30mm-stanchion Marzocchi forks Original for 00-05 (30mm) M-Arch and Monolite assemblies Retrofits 97-00 (Bolt-on Brace) leg assemblies Seal/Wiper kit, 99-05 Monster-T (40mm): 99-05 Monster-T (40mm) Includes: (2ea) Dust wipers, & Main oil seals for 40mm-stanchion Monster-T forks+ Also for 2003/2004 Super-Monster Bushing kit, 97-02 Marzocchi (30mm) pr: 97-02 Marzocchi (30mm) pr Kit: (2) 'drop-in' slotted bushings (enough for one fork) Use in conjunction with MZ-850690 (seal/wiper kit)+ For 1997-2002 Marzocchi forks with 30mm stanchions (also for 03-05 29 Marathon/MX models; and 2005 26 Marathon-Race) (No 02-05 EXR: Made by Suntour: non-serviceable bushings) Through-axle + end cap, Shiver-DC: Shiver-DC Overall length (excluding threaded cap): 189mm (does not fit Shiver SC (single-crown) use: MZ-850724) Seal/Wiper kit, 888,66,Shiver-DC (35mm): 888, 66, Shiver-DC (35mm) Includes: (2ea) dust wipers, and main oil seals for 35mm-stanchion Shiver-DC, 888-series (dual-crown), and 66-series (single-crown) forks Bushing/Seal kit, Shiver-DC (35mm): Shiver-DC (35mm) Replacement bushings (upper and lower), oil seals, and dust wipers for (1) Shiver-DC (Dual-Crown) Marzocchi fork 35mm stanchion design Bushing/Seal kit, Monster-T (40mm): Monster-T (40mm) Replacement bushings (upper and lower), oil seals, and dust wipers for (1) Monster-T or Super-Monster fork 40mm stanchion design+ Also for Super-Monster Bushing/Seal kit, Shiver-SC (30mm): Shiver-SC (30mm) Replacement bushings (upper & lower), oil seals, and dust wipers for (1) Shiver (Single-Crown) Marzocchi fork 30mm stanchion design Through-axle + end cap, 03+ Monster: 03+ Monster For 2003-2005 Super-Monster and Monster-T forks only. Overall length (excluding threaded cap): 183mmNOT for 99-02 Monster-T = USE: MZ-5079NOT for Shiver-series: USE: MZ-850698 (Shiver-DC); (MZ-850724 Shiver-SC = NO LONGER STOCKING) Integrated fender kit, 32/35mm Marzocchi: 32/35mm Marzocchi Fits 03-05 Marzocchi forks with 32mm stanchions: Super/Junior-T, Z1, and DJ series (also fits 2004+ 888 and 66 forks with 35mm stanchions) Includes black fender, decals, and mouting hardware Made by Acerbis in Italy for Marzocchi Seal/Wiper kit, 03-05 Marzocchi (32mm): 03-05 Marzocchi (32mm) For 2003-2005 (32mm-stanchion) leg assemblies Includes: (2ea) dust wipers, and main oil seals Bushing kit, 03-05 Marzocchi (32mm) 2/pr: 03-05 Marzocchi (32mm) 2/pr For 2003-2005 Marzocchi forks with 32mm stanchions: Super/Jr-T, Z1-series, AM-series, and DJ-series (not for '05 D-Street 24: requires same upper/lower bushings not stocking separately) Kit: (2) Upper, (2) lower bushings (enough for (1) fork) Use in conjunction with MZ-850768 (seal/wiper kit) Bushing kit, 03-05 Marzocchi (30mm) 2/pr: 03-05 Marzocchi (30mm) 2/pr For 2003-2005 Marzocchi forks with 30mm stanchions (no 29 forks or '05 Marathon-Race, USE: 850693) Kit: (2) Upper, (2) lower bushings (enough for one fork)+ Use in conjunction with MZ-850690 (seal/wiper kit) Shiver-DC leg guard (bare), blk-left ea: blk-left ea Sold INDIVIDUALLY = Left ONLY (non-drive side) comes with pre-molded disc-tubing/housing guide(Bare) = no mounting bolts USE: MZ-520317 (4 bolts per side, 8 per fork...) Shiver-DC leg guard (bare), blk-right ea: blk-right ea Sold INDIVIDUALLY = Right ONLY (drive side)(Bare) = no mounting bolts USE: MZ-520317 (4 bolts per side, 8 per fork...) Super-Monster T-A fork, Coil-300mm: Coil-300mm Stats for 2003-2005: FORK COMES AS 300mm (11-3/4) TRAVEL Dual Coil spring design with External preload adjusters Shiver-Motocross Dual HSCV open-bath oil cartridge design External damping controls for rebound & high/low compression 55/67mm reach Direct-Mount stem included: 25.4mm or 31.8mm bars (1/13mm reach option available separate: MZ-55055) Dual-Triple-Clamp fork: MAX 7.5 (190mm) Stack Height 1 1/8 Aluminum (Alloy FR) threadless pre-pressed steerer tube 40mm Alloy stanchions with forged aluminum sliders Dedicated 20x110mm Through-Axle (hub separate) Disc ONLY brake mounting: 74mm Post-Mount (8/203mm rotor) Weight: DH- HEAVY; Offest: 69.5mm; Axle-Crown (C-C): 692.6mm Black crowns/arch; Polished legs; Black/Silver decals (3.0 tire OK) Monster-T T-A fork, Coil-200mm: Coil-200mm Stats for 2004/2005: FORK COMES AS 200mm (7-3/4) TRAVEL Dual Coil spring design with External preload adjusters Shiver-Motocross Dual HSCV open-bath oil cartridge design External damping controls for rebound & compression 55/67mm reach Direct-Mount stem included: 25.4mm or 31.8mm bars (1/13mm reach option available separate: MZ-55055) Dual-Triple-Clamp fork: MAX 7.5 (190mm) Stack Height 1-1/8 Aluminum (Alloy FR) threadless pre-pressed steerer 40mm Alloy (gold) stanchions / forged-slider design Dedicated 20x110mm Through-Axle (hub separate) Disc ONLY brake mounting: 74mm Post-Mount (8/203mm rotor) Weight: 12.0lb (5475g); Offset: 69.5mm; Axle-Crown (C-C): 592.6mm Black crowns/arch; Silver legs; Black/Silver/Red decals (3.0 tire OK) 29 Marathon-SL ECC fork, Air-75mm - grey: Air-75mm - grey 29-Wheel Stats for 2004/2005: FORK COMES AS 75mm (2.9) TRAVEL 3-piece, Forged Alloy, M-Arch lower legs for 29/700c wheels M-design, Cryofit Marathon crown with 30mm alloy stanchions ECC-5: 5-position rebound + lock-down & out Extension Control Doppio Air spring design with External +/ Air settings 1-1/8 Aluminum (Alloy XC) threadless pre-pressed steerer tube Standard Quick/Release dropouts V & Disc brake mounting: 51mm IS-QR disc tab dimension Weight: 3.5lb; Offset: ?; Axle-Crown (C-C): ? Polished crown; GunMetal-Grey legs; Chrome decals (2.3 tire OK) 29 MX-Comp '04 fork: Coil/Air-75mm - silver 29-Wheel Stats for 2004/2005: FORK COMES AS 75mm (2.9) TRAVEL 3-piece, Forged Alloy, M-Arch lower legs for 29/700c wheels M-design, Cryofit Marathon crown with 30mm alloy stanchions Open Bath SSV damping with internal rebound control Dual Coil spring design with Air-Assist top caps for additional tuning 1-1/8 CrMo threadless pre-pressed steerer tube Standard Quick/Release dropouts V & Disc brake mounting: 51mm IS-QR disc tab dimension Weight: ?lb; Offset: 44mm; Axle-Crown (C-C): ? Polished crown; Silver legs; Silver/Black decals (2.3 tire OK) Extreme 294 studded W tire, 26 x 2.1: 26 x 2.1 294 Steel studs with Carbide traction pins Skinwall, steel bead 950g Gazzaloddi DH W tire, 24 x 2.6 - black: 24 x 2.6 - black Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more Steel bead 1230g Gazzaloddi DH W tire, 24 x 3.0 - black: 24 x 3.0 - black Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more Will not fit all frames Steel bead 1400g Gazzaloddi Core K tire, 26 x 2.1 - black: 26 x 2.1 - black Lightweight 65tpi sidewalls plus folding Kevlar bead Great for slalom and cross country use Motocross style tread Kevlar bead 620g Gazzaloddi Core K tire, 26 x 2.3 - black: 26 x 2.3 - black Lightweight 65tpi sidewalls plus folding Kevlar bead Great for slalom and cross country use Motocross style tread Kevlar bead 780g Gazzaloddi DH W tire, 26 x 2.3 - 61 duro: 26 x 2.3 - 61 duro Same DH sidewall, full knobs as 26x2.6 & 3.0 DH tires Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more 61sha durometer rubber Steel bead 1100g Gazzaloddi DH W tire, 26 x 2.6 - 51 duro: 26 x 2.6 - 51 duro Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more Soft 51sha durometer rubber Steel bead 1300g Gazzaloddi DH W tire, 26 x 2.6 - 61 duro: 26 x 2.6 - 61 duro Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more 61sha durometer rubber Steel bead 1350g Gazzaloddi DH W tire, 26 x 3.0 - 61 duro: 26 x 3.0 - 61 duro Extra wide footprint motocross style tread with anti puncture claws Super tough 6 ply (260) tpi casing and 4 ply no pinch sidewalls Requires rim width of 28mm or more Will not fit all frames 61sha durometer rubber Steel bead 1550g NBX-UST K tire, 26 x 2.1 - black: 26 x 2.1 - black UST tubeless compatible All conditions, round profile tread with stepped knobs Carbon/Silica 61 durometer rubber, 65 tpi OLC casing Kevlar bead 780g NBX-UST K tire, 26 x 2.3 - black: 26 x 2.3 - black UST tubeless compatible All conditions, round profile tread with stepped knobs Carbon/Silica 61 durometer rubber, 65 tpi OLC casing Kevlar bead 950g NBX K tire, 26 x 2.1 - black: 26 x 2.1 - black All conditions, round profile tread with stepped knobs Carbon/Silica 61 durometer rubber, 65 tpi OLC casing Kevlar bead 570g NBX K tire, 26 x 2.3 - black: 26 x 2.3 - black All conditions, round profile tread with stepped knobs Carbon/Silica 61 durometer rubber, 65 tpi OLC casing Kevlar bead 750g NBX DH W tire: 26 x 2.3 - black All conditions, round profile tread with stepped knobs Dual compound Carbon/Silica 55/61 durometer rubber Double overlap OLC DH 260 tpi casing 4 ply no pinch sidewalls Steel bead 1000g NBX DH W tire, 26 x 2.5 - black: 26 x 2.5 - black All conditions, round profile tread with stepped knobs Dual compound Carbon/Silica 55/61 durometer rubber Double overlap OLC DH 260 tpi casing 4 ply no pinch sidewalls Steel bead 1200g Roadie Pro K tire, 700 x 23c - black: 700 x 23c - black Thermo Silica-60 high grip, fast rolling rubber 65 tpi OLC casing with PCR punture protection, 110 psi Kevlar bead 230g Roadie Lux-PCR W tire, 700 x 25c - black: 700 x 25c - black Long wearing high carbon tread compound Double overlap casing, 100psi Steel bead 385g Nokian Lite tube, 26 x 1.75-2.3 - PV: 26 x 1.75-2.3 - PV Lightweight butyl rubber .60mm wall thickness 135g Nokian DH tube, 24 x 2.1-3.0 - SV: 24 x 2.1-3.0 - SV Heavy duty downhill tubes 1.1mm wall thickness 280g Nokian DH tube, 26 x 2.1-3.0 - SV: 26 x 2.1-3.0 - SV Heavy duty downhill tubes 1.1mm wall thickness 310g Nokian DH tube, 26 x 2.1-3.0 - PV: 26 x 2.1-3.0 - PV Heavy duty downhill tubes 1.1mm wall thickness 310g Impax dead blow hammer set + tips, 16oz: 16oz Smart Hammer: shot-loaded, dead blow technology virtually eliminates rebound and user fatigue Nuplaglas handle with CS grip for optimum power & life Set comes with (6) replaceable striking faces:soft, medium, medium-hard, hard, extra-hard, & steel 16oz nominal weight (Comes with storage/carry case)(Replacement Impax 1.5 striking faces available separate) StrikePro dead blow hammer, orange 16oz: orange 16oz Smart Hammer: shot-loaded, dead blow technology virtually eliminates rebound and user fatigue Nuplaglas handle with CS grip for optimum power & life Orange handle/head with non-marring striking faces 16oz nominal weight StrikePro dead blow hammer, orange 24oz: orange 24oz Smart Hammer: shot-loaded, dead blow technology virtually eliminates rebound and user fatigue Nuplaglas handle with CS grip for optimum power & life Orange handle/head with non-marring striking faces 24oz nominal weight Nuplaglas rubber mallet, 16oz: 16oz Nuplaglas handle with CS grip for optimum power & life Oversized rubber mallet head 16oz nominal weight Impax replacement tip, 1.5 brass ea: 1.5 brass ea Replacement 1.5 striking face for Nupla Impax hammer Insert Brass: Sold EACH Nuplaglas ball pein hammer, 8oz: 8oz Nuplaglas handle with std grip for optimum power & life Ball Pein hammer head 8oz nominal weight Nuplaglas ball pein hammer, 20oz: 20oz Nuplaglas handle with std grip for optimum power & life Ball Pein hammer head 20oz nominal weight Nokon shift cable/casing, Mountain-silver: Mountain-silver Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits most Mountain shifters: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables Nokon shift cable/casing, Road (STI) black: Road (STI) black Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits Shimano STI Road shifters: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables Nokon shift cable/casing, Road (STI) silver: Road (STI) silver Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits Shimano STI Road shifters: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables Nokon brake cable/casing, Mountain-silver: Mountain-silver Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits most Mountain brakes: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables and 2) linear brake pipes Nokon brake cable/casing, Road-black: Road-black Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits most road brakes: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables and 2) linear brake pipes Nokon brake cable/casing, Road-silver: Road-silver Superlight, corrosion free segmented aluminum housing Fiberglass reinforced Teflon liner Front and rear set fits most road brakes: 1.4 meters (55.1) Compressionless design eliminates flex, resists kinking Stainless steel cables and 2) linear brake pipes Nokon Housing extension kit, 42pc black: 42pc black 42 pieces of long fittings, 0.4 meter (15.75) long Nokon Housing extension kit, 42pc silver: 42pc silver 42 pieces of long fittings, 0.4 meter (15.75) long Nokon Teflon tubing liner, 5M ea: 1M ea Replacement Teflon tubing liner for Nokon derailleur and brake systems, 1.0 meter (39.37) long FRO butyl tube, 26 x 2.35 - SV: 26 x 2.35 - SV DH specific 1.7mm thickness tubes prevent pinch flats 505g FRO butyl tube, 26 x 2.70 - SV: 26 x 2.70 - SV DH specific 1.7mm thickness tubes prevent pinch flats 600g FRO butyl tube, 24 x 2.6-3.0 - SV: 24 x 2.6-3.0 - SV DH specific 1.7mm thickness tubes prevent pinch flats 515g FRO DH W tire, 24 x 2.35 sticky rubber: 24 x 2.35 sticky rubber All conditions, round profile, wide spaced block tread Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 18psi Steel bead1275g FRO DH W tire, 26 x 2.35 sticky: 26 x 2.35 sticky Redesigned block tread with improved knob stability Hardpack to intermediate conditions, round profile Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 18psi Steel bead 1355g FRO DH W tire, 26 x 2.50 sticky rubber: 26 x 2.50 sticky rubber Redesigned block tread with improved knob stability Hardpack to intermediate conditions, round profile Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 18psi Steel bead 1545g FRO DH W tire, 26 x 2.70 sticky rubber: 26 x 2.70 sticky rubber Redesigned block tread with improved knob stability Hardpack to intermediate conditions, round profile Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 18psi Steel bead 1735g FRO 909 W tire, 26 x 2.35 sticky rubber: 26 x 2.35 sticky rubber Intermediate to soft terrain tread Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 16psi Steel bead 1365g FRO World Cup W tire, 26 x 2.5 sticky: 26 x 2.5 sticky Ramped center knobs for reduced rolling resistance Slow-rebound sticky rubber, 4-strand steel bead 36tpi F.R.O. (For Racing Only) 4-ply casing Rubber sidewall insert increases casing stiffness Air pressure can be run as low as 16psi Steel bead 1545g   Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200 Page 201 Page 202 Page 203 Page 204 Page 205 Page 206 Page 207 Page 208 Page 209 Page 210 Page 211 Page 212 Page 213 Page 214 Page 215 Page 216 Page 217 Page 218 Page 219 Page 220 Page 221 Page 222 Page 223 Page 224 Page 225 Page 226 Page 227 Page 228 Page 229 Page 230 Page 231 Page 232 Page 233 Page 234 Page 235 Page 236 Page 237 Page 238 Page 239 Page 240 Page 241 Page 242 Page 243 Page 244 Page 245 Page 246 Page 247 Page 248 Page 249 Page 250 Page 251 Page 252 Page 253 Page 254 Page 255 Page 256 Page 257 Page 258 Page 259 Page 260 Page 261 Page 262 Page 263 Page 264 Page 265 Page 266 Page 267 Page 268 Page 269 Page 270 Page 271 Page 272 Page 273 Page 274 Page 275 Page 276 Page 277 Page 278 Page 279 Page 280 Page 281 Page 282 Page 283 Page 284 Page 285 Page 286 Page 287 Page 288 Page 289 Page 290 Page 291 Page 292 Page 293 Page 294 Page 295 Page 296 Page 297 Page 298 Page 299 Page 300 Page 301 Page 302 Page 303 Page 304 Page 305 Page 306 Page 307 Page 308 Page 309 Page 310 Page 311 Page 312 Page 313 Page 314 Page 315 Page 316 Page 317 Page 318 Page 319 Page 320 Page 321 Page 322 Page 323 Page 324 Page 325 Page 326 Page 327 Page 328 Page 329 Page 330 Page 331 Page 332 Page 333 Page 334 Page 335 Page 336 Page 337 Page 338 Page 339 Page 340 Page 341 Page 342 Page 343 Page 344 Page 345 Page 346 Page 347 Page 348 Page 349 Page 350 Page 351 Page 352 Page 353 Page 354 Page 355 Page 356 Page 357 Page 358 Page 359 Page 360 Page 361 Page 362 Page 363 Page 364 Page 365 Page 366 Page 367 Page 368 Page 369 Page 370 Page 371 Page 372 Page 373 Page 374 Page 375 Page 376